Tag: transit-only lanes

Categories
Construction Rapidways Stations

ITS – balancing the needs of all travellers

It’s stating the obvious to say that our roadways are getting slower because they’re carrying too much traffic – that’s the basic definition of gridlock, and it’s an increasing problem everywhere across the GTA.  But what can be done about it?  VivaNext is one part of the solution – if people have the choice of taking a reliable and convenient rapid transit system, there will be fewer cars on the road, and everyone will be able to get around more quickly.

But even with vivaNext, there’s still going to be a lot of traffic out there, and York Region doesn’t have room for more or bigger roads.  So what else can be done to help traffic move better?  This is where ITS comes in.

Although some people may think ITS is connected to “Information Technology”, in the vivaNext world ITS stands for “Intelligent Transportation Systems”. ITS is an international transportation-engineering discipline that is concerned with trying to improve the efficiency of travel, whether it involves the travelling public, commercial vehicles, or transit.  The basic assumptions behind ITS are that delays cost money, and more efficient travel saves money. This new technology is an absolutely critical, although low-visibility, component of the vivaNext program.

ITS is used to ensure that all parts of a traffic corridor’s infrastructure – the physical roadway’s design, lane markings and signs, traffic signal design and timing, and the brains that connect all these pieces – are designed as one coordinated system.  In a transit project ITS has an additional layer which is concerned with how the transit system is integrated into that larger system.

ITS is also about giving people accurate information so they can make better choices about travel, whether that means building roadside signage to alert drivers to upcoming congestion and suggest alternative routes, or giving transit riders real-time information about next bus arrivals.

Overall, ITS is about finding the perfect balance so that all the users of a roadway find it works better; making a roadway faster for one group of users cannot come at the expense of all the other users.  ITS starts with an understanding of who is using the roadway now and who will be using it in the future, and then develops strategies to make it more efficient for everyone.

Along Highway 7, we know that drivers and transit are the main users currently, but that’s going to change as development intensifies. The future Highway 7 will be significantly more urbanized, with more people living and working along the corridor.  That means there will be more pedestrians and cyclists whose travel needs need to be considered, in addition to car and truck traffic.  Helping transit vehicles stay on schedule is also a priority, since rapid transit can’t be rapid if it’s stuck in traffic.

These ITS strategies will balance everyone’s needs, to help everyone get to where they’re going as fast as possible!

 

Categories
Construction Live-work-play Rapidways Stations Urban Planning

countdown

As we get closer and closer to the time when the Highway 7 rapidway will be ready for service, our teams are working hard to finish all sorts of little details.  With much of the construction complete, we’re now focused on the final stages of completion and testing, and then getting ready for handover, when the system is officially turned over to York Region and YRT, the system owners and operators.

Handover means just what it says – it’s the moment in time when a system is handed over to the owner for care and custody.  From that time going forward, a system – which until then has been the responsibility of the Contractor/Design Builder – becomes the private property of the owner, and anyone needing access to do any additional work needs to get the permission from the owner for access.

Because the formal handover is such a significant development, especially on a major infrastructure project like the vivaNext rapidway, it’s important to ensure everything is in perfect working order.  The various steps involved in commissioning, which is the testing period that takes place before handover, vary depending on what is being handed over.  For example, with the fare equipment, we make sure the ticket vending machine [TVM] prints properly.  With the traffic signals, once they’re programmed the permanent signals are turned on and each phase is tested individually, and all the push buttons are tested to make sure they work.

Streetlights are inspected to ensure all the wiring is according to the drawings; that the bases are level, and the power connections are all correct.  The teams go out at night to actually turn on the lights, to ensure all the lamps come on and nothing is flickering.  Lighting is an important safety feature for both pedestrians and vehicles.

Viva driver testing is completed to make sure drivers know how to use the rapidway, its signals, and the stations.

Every single detail is inspected through a visual walk-down and a list of the things that still need to be finished or perfected is created with items graded from most serious to least serious.

Once handover takes place, legal ownership and responsibility is transferred to the owner, and the Contractor/Design Builder’s warranty period begins, just the way it happens when a homebuyer takes possession of a new house.

Handover in this case means some elements of the rapidway, like the rapidway, stations, boulevards and planters, are transferred to the Region.  Others, like the sidewalks and streetlights are transferred to the local municipality to maintain.

Ultimately, everyone who has a stake in vivaNext wants to see it work as designed, to provide a reliable, efficient rapid transit system and beautiful streetscape.  Because, at the end of the day, the ultimate owners are the people who are depending on it to work well: the public of York Region and we all want this to be a system to be proud of.

 

Categories
Rapidways Stations Urban Planning

driver training in progress

We’re really counting down the days to the start of vivaNext rapidway service, and we know you are too: being able to get on board a viva bus and zip past congestion is going to be a wonderful advantage for York Region transit users.  So you’ll know we’re really in the final stretches once you see viva buses out on the rapidway starting this week, which is when York Region Transit (YRT) starts the training process for operators and other staff.

YRT is doing training in two stages, with the first stage during the week of July 29 and the second stage over two weeks starting August 5.

In the first stage, training will be provided for everyone who will need to be familiar with the rapidways, the stations and equipment.  We will have vehicles out on the rapidway, taking customer service staff and other YRT staff along the rapidways and spending time at the new stations.  This will give staff a chance to really interact with all the new features so they’ll be ready to provide support to the public once the system is open.

During this time YRT will also be working with emergency services (police, fire, ambulance) to help them become familiar with the rapidway and safety features at the stations including the emergency call button.  Emergency services personnel will be familiarized with access points where they can enter and exit the rapidway, and in the future emergency services vehicles will have the option of using the rapidway when responding to calls.

The actual operator training begins the week of August 5 and will go on for 2 weeks, running from 8:00 AM to as late as 9 PM some nights, seven days a week.  During this time you can expect to see quite a lot of viva buses running up and down the rapidway, stopping at stations.  They will be clearly marked as YRT Training Vehicles to avoid confusion.  The training will focus on entering and exiting the rapidways, especially entering back into mixed traffic at the east end, and exiting the rapidway at the west end and crossing to the curb to service the Bayview Towers station.

Training will also focus on the new transit signals at intersections, which will provide a single green arrow for transit operations.  This signal will be clearly marked as being for transit only, but YRT operators will be trained to be cautious and on the lookout to make sure members of the driving public are obeying the signals correctly.

As part of their training, operators will spend time at the Chalmers station learning about the station’s layout and features, including the parking pad which will be used by support and maintenance staff for future station and rapidway maintenance and snow clearing.  Operators will also get training on the new fare equipment that passengers will be using once service starts.

Trainees will be taken out in groups of six or less, with one trainer to every three trainees.  They’re all experienced viva operators, so they know the route and the vehicle.   They’re really excited to get going, knowing that in just a few more weeks the rapidway will be open for service.  We hope you follow along with us through this blog series to get all the details as we count down the days!

 

Categories
Construction Live-work-play Rapidways Stations Uncategorized Urban Planning

testing, testing, testing

As you will know from driving along Highway 7, our rapidway construction is really coming along, and this summer a segment will be going into operation.  We still have a bit more work ahead of us before service operation can begin, including some work which will be obvious such as final paving, striping and landscaping.  But in addition to that work, we’re just getting underway on a less-obvious but highly important part of the job, which is to ensure that all parts of the rapidway project are ready for active service.

This stage – known in the construction world as commissioning – is critically important, and planning for it on the Highway 7 rapidway has already been in progress for many months.

So what does commissioning involve, and how do we do it?

First of all, the technical definition of commissioning is that it is the process of assuring that all systems and components of a system are designed, installed and tested according to the operational requirements that have been established.

In the case of vivaNext, the most visible components of the project include the new roadways, passenger stations and amenities, and streetscape elements such as lighting, sidewalks and landscaping.  Ongoing inspections are being done as construction progresses to ensure that these are being built to certain specifications, before they are handed over for use.  Commissioning is a more detailed focus on the key systems and components that together make up the overall communications network.

These components include the fare collection equipment that will be installed at all stations; the station information systems such as the variable message signs, clocks and Public Address systems; passenger security elements such as closed circuit TV systems and emergency call buttons; and the traffic signals at intersections.  It also includes the sophisticated Transit Vehicle Detection system, which will provide information to the traffic signals when rapid transit vehicles are approaching intersections, as well as the overall communications system and fibre optic network that links all of these components.

Obviously these components are very complex, and a huge amount of effort goes into designing and building this equipment to the highest standards in the first place to make sure it will work as intended.  But we also build in a lengthy process of testing to make sure all the pieces are talking to each other in the way they’re designed to.

Testing starts at the factory, where the fabricator verifies that the equipment works as it is intended, and then each component is tested again once it’s installed.  Once all the components are installed and each one is confirmed to be working as designed, a series of additional tests are carried out to confirm that the entire system is integrated properly and working together.

The final step involves testing the reliability and function of the entire system, including simulating actual operation using buses and staff acting as passengers, which gives the people who will be involved in the future operation, maintenance and service of the rapidway an opportunity to become familiar with the new equipment and facilities.

This entire process takes several months, and is done at each individual station and intersection as its equipment is installed.  So you can see that there’s still a lot of work behind the scenes to get to the day we’re all looking forward to – when the first viva vehicle pulls into the rapidway for the first time on Highway 7 in August.

 

Categories
Construction General Rapidways

turning on the Lights

Street lights are one of those infrastructure elements that the public may not give a lot of thought to, but in truth their design contributes significantly to the overall streetscape.  And because our project is being used to transform Highway 7 East from a highway to an urban corridor, all the vivaNext design components including the street lights have been given a lot of thought.  But before design considerations can be focused on, safety is the first priority to be achieved by street lighting. Here’s an overview of the role lighting plays in the vivaNext vision, and the street lighting elements you will see installed on all the rapidway corridors.

Designing street lighting, like all the major elements in the vivaNext project, is used to achieve a combination of practical and design objectives.  Lighting is first and foremost a public safety consideration. There are strict national and local standards against which street lighting is designed including how much lighting is required for different conditions (for example, different measures are used to determine the lighting levels for roadways compared to intersections and sidewalks).  Once the levels are known, lighting designers will develop a design, which includes variables such as pole height, spacing and “lux”, which is the amount of light to be provided by the fixture.

Once the lighting design is done, streetscape design objectives can come into play in order to marry the technical requirements with the architectural priorities needed to achieve the desired streetscape “look”.  In the case of vivaNext, the streetscape objectives are for a modern, stylish and uncluttered look that will contribute to the feeling of the corridors as being urban destinations, and make them distinctive from other Regional roadways.

To achieve all these safety requirements and design objectives, we have selected a special street light pole and luminaire (the light head or fixture), and arm that holds the luminaire, to be used along all the rapidway segments.  The poles will be a little higher than the ones they’ve replaced (9.9 m high versus 8.0 m), and they’re made of metal with a dark grey powder-coat finish for long-wearing good looks (and less maintenance).  Unlike most poles which are octagonal shaped and tapered to the top, these are round and cylindrical for a sleeker, more modern look.  And the lighting head or luminaire on top was chosen to complement the sleek modern look of our canopies.

Under its good looks, the street lights have a photo sensor to automatically turn on and off when it’s dark.  And the bulbs – which are little larger than the light bulbs you have in your home – only need to be replaced every 4 years.

So next time you’re sitting at a stop light or at a bus stop and you’re looking at the beautiful new streetscape, you’ll know more about all the decisions that were needed to turn on the lights!

Enjoy!!

 

Categories
Construction General Live-work-play Rapidways Stations Urban Planning

what’s a rapidway?

The word rapidway is new to most people, but pretty soon it’s going to be a very familiar concept for people in York Region.  We’ve had lots of interest from people wondering how exactly the rapidway on Highway 7 is going to work once it’s in service this year, and whether it will result in any changes for drivers, transit users and pedestrians.  So to get you started, here’s a primer on some rapidway basics.  Then for more detailed information, check out this blog over the upcoming days and weeks, for lots more information about what’s being built and how it’s going to benefit all of us.

  1. Who can actually drive in the rapidway?

    2. The rapidway will only be used by vivavehicles.  YRT buses will continue to run in mixed traffic as they do now, and will continue to use their existing curbside stops.  The exception is emergency vehicles; fire, ambulance, police, who may use the rapidways to help them through traffic.

    Under no circumstances will cars or other vehicles ever use the rapidway.  We’ll have signs at the beginning of the rapidway in each direction, making it very clear that non-viva vehicles must not enter.

  2. How will I know how to stay off the rapidway?

    3. We’ve made it easy to see where the rapidway begins, by paving the whole rapidway with distinctive bright red asphalt (see my blog in the next couple of weeks on red asphalt). It will be very obvious where the edges of the rapidway begin and end. To make it even more obvious, a rumble strip has been installed along the edges of the rapidway. Driving over the rumble strip will produce a loud noise if a driver begins to edge into the rapidway by mistake.

  3. How will I make a turn across the rapidway

    4. We’ve designed several features that will make it very clear where and when drivers can turn across the rapidway. (look for my blog in the next couple of weeks for more description of the new intersections and traffic signals). Left turns will only be allowed at intersections, which will have well-marked turning lines painted on them. The rapidways will have their own dedicated transit signals for viva drivers, which will be clearly marked and separate from the left turn signals for all other drivers. Lastly, there will be a protected left turn phase, meaning that drivers turning left (or making u-turns) will get a separate green arrow on its own phase, before through-traffic is allowed to move.

  4. How will pedestrians get to the vivastations?

    5. Every station is located adjacent to a signalized intersection, with a clearly marked crosswalk to make it easy to cross to the station in the median. Because Highway 7 with the rapidway lanes in the middle is now wider than it used to be, some pedestrians may want to cross the road in two stages, going to the median on the first stage, and then crossing to the other side on the second stage.

So that’s the most basic primer on how the rapidway will work, but I know people have many more questions. Over the next few weeks, I’m going to post an ongoing series of blogs on all the features of the new Highway 7 rapidway. But in the meantime, we want to know what you’d like more information on. Help us out by filling in your priority topics in this simple survey:

    [poll id=”43″]
Categories
Announcements Community Events General Rapidways Uncategorized

follow along this summer as we introduce you to some fun with the blue boots!

Anticipation is building as construction nears completion on the first section of the Highway 7 rapidway, as we get closer to seeing our designated bus lanes for viva fully operational this summer. You may have seen finishing touches applied to the canopies or even caught a glimpse of red asphalt being paved. It’s an exciting time for vivaNext and we want to share that excitement with you. With this in mind, we are pleased to introduce the Blue Boots – vivaNext’s mystery mascot if you will!

For the next six weeks, get onboard the fun bus and follow the Blue Boots Series, a six video summer project brought to you by our communications summer students. Every Wednesday, check our YouTube channel to discover where the boots are going, who they’ll meet and where they’re headed next! Each video will explore unique aspects of the vivaNext project that we hope will get you excited about riding viva.

So be ready to be moved with the Blue Boots today! Watch the first video by clicking this link.

 

Categories
Construction General Rapidways Uncategorized Urban Planning

Your Community Liaisons

You might recognize Nimisha Raja, Carrie Slattery or Michelle Dudzik, our community liaisons from Markham, Newmarket and Vaughan/Richmond Hill respectively, from our website or the construction bulletins you’ve signed up for or you may have met them at a vivaNext event.

But, we also have a new face joining forces with our three existing liaisons –  Tamas Hertel, the Community Liaison Specialist on Yonge Street in Richmond Hill and Newmarket. Over the past four months he has been quite busy.  Tamas has been making contact with businesses and residents along Yonge Street as preparation for future rapidway construction.

They are all readily available to answer any questions or assist you with everything related to the vivaNext project. You name it, whether you’re a property owner, business operator, tenant, special interest group, or any other interested stakeholder in York Region along the viva rapidway corridors, they are happy to hear from you.

All four of our Community Liaisons spend a lot of time out in the community, making presentations and answering questions about construction schedules and the projects in general. And with project information centres open in both Newmarket and Vaughan, you have more opportunity to stop by and meet your Liaison – check for the hours here.

We hope that our website, Facebook page, or construction bulletins continue to help you find answers to your questions. But if you would rather speak to someone, or you’re wondering about your specific property, Nimisha, Michelle, Carrie or Tamas are available and happy to talk to you.

Markham:
Nimisha Raja
Community Liaison Specialist
Telephone: 905-886-6767 Ext. 1023
1-877-464-9675
Cell phone: 416-712-8938
Email: nimisha.raja@york.ca

Newmarket:
Michelle Dudzik
Community Liaison Specialist
Telephone: 905-886-6767 Ext. 1096
1-877-464-9675
Cell phone: 905-716-7663
Email: michelle.dudzik@york.ca

Vaughan:
Carrie Slattery
Tel: 905.886.6767 Ext. 1129
1-877-464-9675
Cell: 289.716.0091
Email: carrie.slattery@york.ca

Yonge Street, Richmond Hill and Newmarket:
Tamas Hertel
Tel: 905.886.6767 Ext. 71357
1-877-464-9675
Cell: 905.505.1430
Email: tamas.hertel@york.ca

Categories
Construction General Rapidways Uncategorized Urban Planning

Staying safe during construction

Summer is here and vivaNext construction is in full swing. With multiple projects on the go and lots of different things coming up on a daily basis, one of our top priorities is safety – both for the public and for our workers. Our contractors have very detailed protocols for the steps they need to follow to keep their crews and members of the public safe, and ensuring safety is something we think everyone should take seriously.

Our work has to happen on the edges and in the middle of some very busy roads which is a big challenge. Closing all or part of Highway 7 in Markham or Davis Drive in Newmarket just isn’t an option, so the required strategy is to create as much separation as possible between active construction zones, and drivers and pedestrians. We created this separation by shifting the lanes away from the shoulders of the road, giving our workers more room to work, store materials and use heavy equipment.

To make sure everyone knows where the work zones are, we’ve posted signs and installed fences to clearly show that some areas are off-limits to pedestrians and drivers. We’ve put in place temporary sidewalks and temporary bus stops to ensure pedestrians have a clear path around work zones, and signs to make sure drivers can find temporary entrances to businesses and addresses. Every single crew member working for us is reminded and tested regularly on what they need to be doing to stay safe, and keep you safe too.

Most drivers and pedestrians follow signs and stay away from construction areas, but sometimes pedestrians try to take shortcuts through work zones. It may seem like there’s little risk to doing this, but the reality is that work zones are filled with potential hazards. And for those who aren’t trained or wearing safety gear these hazards may not be either visible or obvious. Unexpectedly entering a construction site can put you and others at risk. Wires just below the surface, sharp objects, uneven ground and other hazards can lead to injuries. And the risk of walking near or around heavy equipment or vehicles, especially when they’re backing up, needs no explanation. Our crews know all the potential hazards, which is why they follow safety procedures and wear protective, highly-visible clothing, headgear and footwear at all times.

Please, when you come across a construction area, respect the need for safety, and do the following:

>> Consider construction sites out of bounds, at all times – even when workers aren’t on site. Fences and no entry signs are there for a reason, even if you can’t see the reason.

>> Follow signs for temporary pathways or detours, even if the original route seems to still be available. We know your time is important and we wouldn’t create a detour if it wasn’t absolutely necessary.

As we go about our projects, we know that our construction disrupts the life of pedestrians, transit riders and drivers, and we do everything we can to keep that to a minimum.

We hope that as you pass by our construction areas you’ll keep safety mind!

Categories
Construction Going Green Live-work-play Rapidways Stations Urban Planning vivaNext.com

Working together to achieve transit success

You have heard us talk a lot about growth at vivaNext.  Managing growing communities and planning for the future are always top of mind. As the region that comprises nine local municipalities and is home to 1,084,000 residents, 29,000 businesses and 495,000 employees, York Region is the fastest growing region in the Greater Toronto Area. We are always striving to identify key opportunities to improve upon and expand rapid transit plans to support the Region’s increasing population.

The successful execution of the vivaNext rapid transit plans rely on collaboration. While collaboration seems like a long word that has enough syllables to leave you tongue-tied, to me the definition is simple – working together as a team. At vivaNext we strive to work hand in hand with all our stakeholders and neighbours. With open dialogue and information exchange we do our best to listen and address comments and concerns.

Our rapidways are being built along the Region’s busiest corridors where urban development is taking shape. Check out a few municipal videos showcasing local growth.

VivaNext is proud to be bringing York Region an exceptional transit system that will connect it to the Greater Toronto and Hamilton area.