Categories
Commissioning Construction Safety Uncategorized

navigating through construction with safety top of mind

The rapidway project in the Bathurst & Centre area is making excellent progress – and the transformation of the corridor is in the home stretch. With Centre Street’s long-term lane closures opened again – and two lanes of traffic are flowing both eastbound and westbound – drivers will have relief. It’s the perfect time to take a fresh look at traffic movements and safety in the area.

good habits are key when it comes to safety

During the heaviest construction periods, a number of drivers may develop habits of cutting through residential streets that are meant for local traffic only as a short-cut around construction. Oftentimes, higher volumes of traffic and excessive speeds are noted on roadways meant for quiet, residential neighbourhoods.

We understand and acknowledge the inconvenience and frustration of construction. However, it is important to remember the following:

  • stick to the main arterial roads and avoid residential short cuts
  • obey posted speed limits
  • watch for pedestrians crossing

a project designed with quality of life in mind

The new streetscape on Centre and Bathurst streets is designed with the people of the community top of mind. It’s becoming a more walkable and beautiful area with wider, tree-lined sidewalks with updated infrastructure and easy access to rapid and local transit – and many places to live, work, shop and play.

As the community grows and people adopt new travel patterns, we drive positive change together. Bus rapid transit and subway connections are a key part of planning for change and growth. As part of the Centres and Corridors initiative, we are building a project that is much more than just a rapidway.

For information about ongoing vivaNext projects, be sure to subscribe to email updates, and follow us on Twitter. You can also follow us on Instagram, YouTube and Facebook. Questions or comments? Comment below or email us at contactus@vivanext.com.

Categories
Announcements Bridge Expansion Commissioning Crosswalks cycling Design Innovation Live-work-play pedestrian path Uncategorized

meet the NEW multi-use path on Highway 7 West

If you’re walking, strolling, jogging or cycling Highway 7 West in Woodbridge, there is a new multi-use path in the centre of the road to get you across the bridge over Highway 400. Watch our new video for a bird’s-eye view and a peek at what it’s like when you’re in it.

This protected path for pedestrians and cyclists has signalized intersections at each end to enable safe crossings back to the sides of Highway 7.

Separated from traffic and transit vehicles by concrete barrier walls on either side, the multi-use path is wide enough for two-way travel. By bringing travellers away from the outside of the bridge, as well as the busy ramps of Highway 400, the new multi-use path improves regular traffic flow, and crucially for pedestrians and cyclists offers an effective, convenient solution as people make connections to and from the Vaughan Metropolitan Centre and throughout Vaughan and York Region.

While centre-road travel for cyclists and pedestrians is a new concept here in York Region, they’ve been built in the U.S. and were originally inspired by the Sands Street Bikeway in Brooklyn, NY.

Integrated with the City of Vaughan’s bike lane program and York Region’s network of bike lanes, the multi-use path connects with raised bike lanes and wider pedestrian sidewalks west of Highway 400, from Famous Avenue to Bruce Street [raised bike lanes opening in 2020], and with bike lanes already constructed on Highway 7 from Edgeley Boulevard/Interchange Way to Bowes Road/ Baldwin Avenue, as well as up Millway Avenue to the subway and the newly opened SmartCentres Place Bus Terminal in the Vaughan Metropolitan Centre.

For information about ongoing vivaNext projects, be sure to subscribe to email updates, and follow us on Twitter. Questions or comments? Comment below or email us at contactus@vivanext.com.

Categories
Commissioning Construction Design Rapidways Safety Signs and barrels Stations Technical Traffic signals Transit Uncategorized Utilities

why vivaNext staff do ‘walk-downs’ of our construction sites

constructions workers reviewing a roadway construction site for a transit project

Blog post by: Elizabeth Kim

Have you ever seen a group of people with white hard-hats walking along a rapidway construction site, although it seems like there isn’t much construction happening? Have you ever wondered, “How many people does it take to look in a hole?” or, “Why is everyone just standing around and talking?”

Well, we hope to help answer those questions.

getting a closer look

The constructor schedules regular walk-downs of each of our rapidway construction projects – from one end to another – in order to closely review completed, ongoing and upcoming work. Different walks have different purposes, including safety monitoring, the quality of work in progress and the quality of completed elements to ensure everything works as intended once the rapidway opens for service.

That’s not all. As we get closer to a project’s completion and opening for service, the number of walk-downs goes way up to ensure that everything has been built according to plan in order to ensure that projects can be opened for service to the public. Here are some answers to the two biggest questions about walk-downs:

why so many people?

Each team member on a walk-down has a specific job. And depending on the purpose of the walk-down, a variety of people with different expertise may participate.

To review an area before a major work operation, for example, the walk-down team may include a vivaNext Project Engineer, who would ensure that the work plan is accurate to engineering drawings; and the Community Liaison, who communicates the impacts to businesses, residents and other stakeholders.

It may also include an Engineer from York Region’s Transportation Services, who inspects the roadway elements – such as street lighting, sidewalks, boulevards, traffic signals, pavement markings, and signs – and ensures compliance with lane closure permits;

Safety Managers ensure that the work plan is safe. And Supervisors from the Constructor and sub-contractor companies take everyone through the work plan and operation.

In some cases, municipal and regional staff will join us on inspections– for example, with water main connections, vivastation construction, paving, and red asphalt in the rapidways; and for works near Highway 400, provincial Ministry staff may join the walk-down.

what are they looking for during a walk-down?

Participants are looking at a variety of factors based on their role within the project team, and depending on the particular purpose of the walk-down.

Some participants are specifically looking for possible errors in construction – in new pavement, installed signs, storm sewers, and other quality concerns to be addressed.

All items are documented and while some items may need to be fixed immediately, others will be addressed during the contractor’s warranty period. Other participants look for how the operation will unfold and the impact to the community, such as accessibility for pedestrians. Follow-up walk-downs are then scheduled to review progress on documented items.

Each participant on a walk-down plays an important role in order to deliver high-quality rapidway projects throughout York Region.   

STAYING INFORMED

Make sure to connect with us on social media to receive regular construction updates and stay in touch! The best way to stay informed about our construction projects is to sign-up for email notifications at vivanext.com/subscribe, and to follow us on our social media platforms.

Categories
Commissioning Construction Facilities and terminals Rapidways Stations Technical

the critical role of spiders in building Vaughan Metropolitan Centre Station

Now, before you think we’ve imported some exotic tropical arachnids, what we call “spiders” are actually the stainless steel fittings that hold together the glass pieces on our stations. They’re called spiders due to their shape, and they play a critical role in the architectural and structural design of our stations.

For the new Vaughan Metropolitan Centre [VMC] rapidway station, the main structural support comes from the welded steel superstructure that forms the distinctive curved shape. Over top of that, steel, custom-made spider fittings are bolted to each steel intersection. The spider fittings support the individual glass panels on the station’s sides and skylight.

410 panels of glass

Each triangular-shaped panel of glass is attached by brackets on the legs of the spiders. Because each piece of glass is a unique size and shape, the job of attaching the glass to the spiders is very fiddly. The extra-large 50 by 24 metre VMC canopy has an eye-popping 410 panels, each equally spaced and slightly different due to the station’s curved planes. The tempered glass can’t be cut or drilled on site without shattering, so holes for the brackets were made during the fabrication process.

beautiful precision

We knew if the holes in the glass didn’t line up exactly to the spider brackets, the glass pieces wouldn’t fit. Since glass fabrication is a fairly slow process, we didn’t want to risk having to go back and remake a piece. Rather than making the glass in advance, we installed the spiders, then measured them with a 3-D laser scanner that registered the targets as multiple cloud points; essentially the same process used to make a 3-D model.

The last step was the installation of the glass panels to the station roof, and seeing all this precision and planning come together for beautiful results. Now if you visit the VMC rapidway station, you can take shelter under a strong and stunning glass canopy reminiscent of the great European architectural traditions, right here in York Region.

 

Categories
Commissioning Construction Facilities and terminals Rapidways Safety Stations Technical

beautiful curves of glass

If you’ve ever had to replace a window in your house, you know that working with glass is fiddly, exacting work. It needs to fit perfectly or you’ll get drafts and leaks. Glass has no tolerance for being the wrong shape or size. And dropping a pane from a window: well, that means another trip back to the store.

Now, imagine the challenges of installing the glass on the curves of our new Vaughan Metropolitan Centre [VMC] rapidway station. As you can guess, it was a long, multi-stage process, done with great care and precision.

strength and safety

As with all our vivastations, the VMC glass was laminated and tempered for strength and safety. First the glass was cut into panes, and then it went through a special process to make it extra strong. This way, if it breaks, it crumbles into small granular chunks instead of sharp pieces.

To add more strength and make it even safer, we then laminated the tempered glass by sandwiching two glass sheets together around an interlayer. If the glass is broken, the interlayer holds the small pieces together instead of breaking into many little shards, the same way a car windshield stays together in an accident. The interlayer on the blue skylight glass is actually a different, stronger material than the interlayer used for the clear side glass, since the top skylight needs to support heavier loads from snow and maintenance workers.

creating curves

Fitting flat glass to the curved shape of the station was a challenge, because every surface of the steel roof curved over two dimensions, much like the outside of a ball. The first step was to divide the glass into a series of triangles. Three-sided shapes are easier to work with compared to four-sided shapes, the same way a tripod is more stable on uneven ground compared to a four-legged chair.

But this still left the challenge of fitting flat pieces of glass over a curved frame. The solution here was to adjust the bolts on the corners of the spiders [the stainless steel fittings that hold  the glass pieces onto the frame] so they’re each set at a different height. We knew how high each bolt needed to be from 3D scans, so we adjusted them before we installed the glass. By installing each corner of glass at a slightly different height, we recreated the curves of the tubular steel frame.

intricate jigsaw puzzle

The last step was putting the glass panels in place, one by one. Although they were all triangles, every piece was unique like pieces of a jigsaw puzzle, so to avoid mix-ups they were carefully numbered before they were delivered. Once the glass panels were bolted onto the spiders and the final adjustments made to perfect the curve of the glass, we sealed the gaps with caulking to make the structure weather-tight.

Building this strong and beautiful glass-covered station took precision, but look at the stunning results! This landmark station helps set the architectural stage for future development at the VMC and makes the everyday experience of transit a beautiful one for our customers.

Categories
Commissioning Community Events Facilities and terminals General Innovation Rapidways Stations Subways

amazing team, extraordinary results

What a week it has been! The launch of the TTC Line 1 subway extension with the Highway 7 West rapidway and vivastation on Sunday in Vaughan is one of those lifetime moments. We’re going to remember this day for the rest of our lives. This is the day everything became a little closer, and a lot faster for York Region and the City of Vaughan.

unwavering dedication

For everyone involved, including us at York Region Rapid Transit Corporation, it was an exhilarating and emotional weekend, the culmination of years of incredible challenges and unwavering dedication, everything we’ve been working toward for a very long time! Many of us shouted and cheered as the first train pulled into the new subway station.

Then, seeing that Viva bus roll down the red asphalt rapidway into the open, airy Vaughan Metropolitan Centre vivastation and pick up actual passengers who came up the stairs from the subway – well, it’s hard to describe the feeling, except to say that more than a few grew a little misty-eyed! So many people came out to mark this milestone day for transit in the Greater Toronto and Hamilton Area, we know how much these new transit connections matter and we thank you for your patience during the long construction period.

#AnEngineerWasHere

Kudos goes out to the engineers, planners and project team, whose tireless drive moved the VMC station and rapidway project forward every step of the way: from the environmental assessments to the design to breaking ground, from utility relocations to storm sewer work and road widening. Along with the many contractors, they pushed though good and bad weather, scalding heat, freezing cold and everything in between. They worked through paving and bridge reconstructions, to timelines off schedule and on again, to the construction of our vivastations and our landmark Vaughan Metropolitan Centre vivastation. Experts from many agencies, cities and private companies all came together to make this day happen.

Now we have incredible, tangible results with the first subway-BRT connection, a legacy that will keep our Region moving for years to come. Just goes to prove anything is possible with extraordinary teamwork, unwavering dedication and an eye to the future. Again, thank you for supporting this project and we hope you get out and try the new system!

Categories
Announcements Commissioning Community Events Construction Facilities and terminals Rapidways Stations Subways

Subway and new Viva connections NOW OPEN in Vaughan!

This morning, the first subway carrying transit customers arrived in York Region, forging a historic connection between bus rapid transit and subway. Now, everyone can experience seamless transit connections in Vaughan! The vivaNext rapidway and new landmark vivastation also opened for service this morning with an epic celebration at Vaughan Metropolitan Centre [VMC], alongside the TTC Line 1 subway extension opening. Viva la subway!

Read the news release.

even more transit connections

Now the transit connections available to customers simply go further and faster. The rapidway-subway connection marks a tipping point for transit in York Region, amplifying the power of the Viva rapid transit network.

The VMC area is a transit powerhouse, home to two new stations: the landmark Vaughan Metropolitan Centre vivastation and the Vaughan Metropolitan Centre subway station – the new terminus of TTC Line 1. In a few months, the SmartCentres Place Bus Terminal will make the VMC area even better, connecting YRT buses to both stations with a pedestrian tunnel.

true city building

There’s no doubt – your destination has arrived! The new VMC development is true city-building on an epic scale, built on the foundation of strong transit connections. Not only does rapid transit transform how people move in our Region, it changes how we live – for the better. Stronger economies, more jobs, and walkable, livable, desirable communities: it’s the driving force behind York Region’s Transportation Master Plan and the reason we build rapid transit.

On an even larger scale, strong connections like these that cross regional borders are crucial to the Greater Toronto and Hamilton Area [GTHA], and a key strategy of the Metrolinx Draft 2041 Regional Transportation Plan.

Thank you!

Now we can see the network take shape in York Region, with three rapidways running, two more underway and an actual subway connection!

Changes of this magnitude are fueled by the power of collaboration and funding partnerships. Our rapidway projects are funded by the Province of Ontario, and our other projects are funded by a combination of Federal, Provincial and Regional contributions. SmartCentres Place Bus Terminal even includes some private funding for the pedestrian tunnel.

We’ve all come a long way together, and we thank you for your patience during construction. Now, we hope you enjoy the ride!

Categories
Announcements Commissioning economic & financial Facilities and terminals Innovation Rapidways Stations Subways

The ribbon is cut! Trudeau and Wynne came! Now only two days until subway meets BRT!

This historic weekend of transit firsts in Vaughan kicked off in style.

Prime Minister Justin Trudeau joined Premier Kathleen Wynne, Toronto Mayor John Tory and many other dignitaries to officially cut the ribbon on the Line 1 subway extension, at Vaughan Metropolitan Centre [VMC]. Then, they rode the subway from the VMC station to the new York University subway station for a press conference.

“The Toronto-York Spadina Subway Extension will mean a faster commute, less time in traffic and more money in people’s pockets as they trade their cars for a subway ticket,” Prime Minister Trudeau told the crowd at York University station.

That’s music to our ears!

The crowd included partners from all three levels of government, who worked together to make this project a reality. Also on hand were many members of our vivaNext team, who played a key role in this project, working with the TTC on the York Region stations. Joining the crowd were the many partners who helped make this happen.

three subway stations in York Region!

In just two days, York Region will have three shiny, new subway stations open for service: Pioneer Village, Highway 407 and the end of the line, Vaughan Metropolitan Centre. On opening day and Monday, members of our team will be on hand to answer your questions and help you find your way.

Our brand new, flagship bus rapid transit station will greet riders at the VMC, forging the connection between our rapid transit network in York Region and the new subway.

Also coming later this month is the GO train connection at the new Downsview Park station, where commuters on the Barrie GO train can connect to the Line 1 subway extension.

“If we build it, they will come”

Now, with the 8.6-kilometre subway extension, downtown is a mere 42 minutes away, but we expect subway traffic to flow both ways. Wayne Emmerson, York Region Chairman and CEO, said, “If we build it, they will come.” He called the subway a “once in a lifetime opportunity,” saying it “will help further develop an urban community that is transit-oriented, forward-thinking and has economic development opportunities to benefit current and future generations.”

“Big transit takes time”

Premier Wynne acknowledged the time and effort of all levels of government that came together to connect the heart of York Region to downtown. She also gave a nod to our new Highway 7 West rapidway, saying that downtown foodies can hop the vivaNext rapid transit system to restaurants in Richmond Hill.

But she summed it up best with: “What an amazing day this is!”

We agree, Premier Wynne! And this Sunday will be even better, when the subway and our rapidway open for service, and you can experience the ride firsthand. It’s going to be a rush! We hope to see you there.

Categories
Commissioning Construction Facilities and terminals General Rapidways Stations Technical Traffic signals

proof of performance

The days are counting down and the excitement is growing. The launch of our extraordinary new vivastation at Vaughan Metropolitan Centre, along with the ground-breaking TTC Line 1 subway extension and our rapidway, is only four days away. Now we have one last crucial task to complete before our gorgeous new station joins the transit mega-hub at the VMC: we need to carry out commissioning.

testing, one, two, three

Commissioning of the new bus rapid transit station is similar to the process we do for all our new stations, rapidways and facilities. Very simply, it means confirming everything we installed, from the heaters and automatic doors in the passenger enclosures, to the cameras, speakers and variable message signs [VMS] on the platforms, works the way it’s supposed to.

Before their work is done, our builders have to test every single device and piece of equipment to demonstrate they met all their obligations. The station has complex equipment for fares and security, and all the general building components like lights, plumbing, and electrical connections. Systems connect to the central York Region control room, enabling them to see the platforms, hear the speakers, run messages on the VMS and communicate through emergency call buttons. During commissioning, every light switch, outlet and connection is tested. Our builder also works with the new station owners, YRT/Viva, to help them assume operation.

smart systems

The new station is part of a highly sophisticated system which includes the broader rapidway network and its whole range of intelligent transportation system [ITS] features. ITS is really the reason Viva is able to operate as a rapid transit service, keeping our system running on time with supervision from YRT/Viva’s central control room.

trial run

A critical part of commissioning is testing the newly finished components in the new VMC station and the surrounding rapidway, to make sure they’re all connected properly to the control room and the rest of the system. Testing for full integration requires that we run buses through the new rapidway for a day. During that process, we’ll make sure that all the traffic-related components are communicating properly to the buses and to the general system, and ensure the traffic signal timing is set for optimal travel times.

This station has one more layer of complexity beyond the other stations we’ve built, because of its connections to the TTC. We need to check every interface with the TTC system, which includes electrical connections running between our station and their panels below.

Commissioning is the final step, and you can see why it’s so important to do it carefully and methodically. Because of that complexity, some work will continue on the station in 2018. But once it’s finished, get ready to celebrate and enjoy faster transit with us!

Categories
Announcements Commissioning Community Events Construction Facilities and terminals General Rapidways Stations Subways Urban Planning

Transit gets epic in Vaughan this Sunday

Get ready for the game-changer. Transit is about to get epic at the Vaughan Metropolitan Centre [VMC], and you’re invited. On Sunday, December 17, this public launch event is set to change the face of transit forever in York Region.

The public opening of the TTC Line 1 Subway Extension will make history, as the first subway ever in York Region brings transit customers up to Vaughan Metropolitan Centre.

Today was another great day for integrated transit connections in the York Region and the GTHA – as we celebrated the official opening of the newest bus rapid transit [BRT] rapidway segment and Vaughan Metropolitan Centre [VMC] Station on Highway 7 West. This new vivastation will be fully connected to the new VMC subway station.

Bus rapid transit meets subway for the first time!

you’ll be moved!

The new rapidway section runs west of Jane Street to Edgeley Boulevard, with dedicated centre lanes that will whisk riders to the VMC with faster and more consistent travel times. Including the previously completed section, the rapidway will run the full 3.6 kilometres from Bowes Road to Edgeley, the bus-only lanes clearly marked for drivers with red asphalt.

Coming in 2018, SmartCentres Place Bus Terminal will complete the transit powerhouse at VMC, as YRT buses begin providing services from this stunning new bus terminal.

an extraordinary station

Along with the rapidway comes an extraordinary vivastation for a new downtown destination – the Vaughan Metropolitan Centre rapidway station. The design supersized our traditional vivastation arched glass canopies, inspired by historic and modern European transportation architecture. The open, airy, domed glass canopy shelters the road and station.

the future is now

It’s only 43 minutes via subway to downtown from the VMC, but there’s no need to go anywhere. If you’re at Vaughan Metropolitan Centre, you’ve already arrived!

Welcome to the brilliant future of transit-oriented development, right here, right now in York Region. The VMC shows what it’s all been about: rapid transit connections that fuel livable, walkable, desirable communities, spur jobs and economic growth, creating places where we all want to live, work and play.